Power Supply Model 3200

The SCE 3200 series power supply is a small, modular 400Hz AC to DC supply which
outputs +18V @ 2.7A.
The unit is conservatively designed and rated with a minimum MTBF of 300,000 hours
under Naval, Sheltered conditions at 50șC per MIL-HDBK-217E. The supply follows the
design guidelines in NAVMAT P-4855, and is derated per AS4613 class A.
The supply is equivalent to Abbott Transistor Laboratories W series, with significantly
improved performance.
SPECIFICATIONS
Electrical
Input:
- Voltage Current 105VAC - 135VAC, 350Hz to 450Hz single phase
Output:
- Voltage +18V
- Current 2.7 Amp
- Regulation ±0.1% line, <±20mV load
- Transient 50% to 100% load step: 3% maximum excursion, with recovery to
regulation limits in under 100sec.
- Ripple 0.2% p-p maximum
- Efficiency >45% at full load over entire input range
- Temperature Coef. <0.015%/șC variation over full -55șC to +90șC
range
Environmental
- Operating Temperatures -54șC to +90șC
- Humidity per MIL-STD-810E meth. 507.3 proc III
- Salt Fog per MIL-STD-810E meth. 509.3 proc I
- Altitude per MIL-STD-810E meth 500.3 proc II
- Shock per MIL-STD-810E meth 516.4 proc I,III
- Temp. Shock per MIL-STD-810E meth 503.3
- Burn-In Each supply is subjected to 10 temperature cycles from -54șC to
70șC, for a total of 60 hours of testing.
- Vibration Each unit is vibrated for 10 minutes at 6.3 Gs per NAVMAT
P-9492.
Protection Circuits
- Current Limit Foldback type with automatic recovery, will operate into a
short circuit with no damage.
- Isolation Input, case and outputs are isolated from each other to 700VDC,
with 500M ohms minimum resistance.
- EMI Meets MIL-STD-461B Class A1 (airborne equipment)